Category Archives: Interior Painting

How to Apply Epoxy Paint to Garage Floor

How to Apply Epoxy Paint to Garage Floor

In recent times, the popularity of epoxy paint coating for garage floor has increased manifold, and it can be attributed to its many good points and the fact that it comes in a variety of colors that you can choose from. The durability of epoxy paints has always been talked about and another factor that works in its favor is the fact that it does not allow oily or greasy particles to attach to its surface which makes the paint easier to clean, and thus, ranks it higher than several other types of paints. There are three different types of epoxy paints that are available in the market; water based epoxy, solvent based epoxy, and solid epoxy. The most popular type of epoxy paint for garage flooring in the market are solvent based paints.

Applying Epoxy Paint to Garage Floor

Solvent epoxy paints have an adhesive quality and it penetrates the flooring of the garage easily. But while using this type of paint, it is important that you use proper protective gear, as the fumes of the solvents are extremely harmful. It is also important that after you paint the garage, you leave it ventilated, so that there is no build up of fumes in the garage. Now that you know what precautions need to be taken before taking up a project like this, in the next section we tell you, exactly what steps you need to follow to paint the floor of the garage. In order to apply paint on a garage floor, you will need a paint kit, paint brush, primer, stir stick, metal putty knife, and a pressure washer.

First and foremost, it is important that you clean the floor completely to remove the dust and dirt completely. Use the pressure washer to do this. You will also need to remove any paint on the flooring. In order to do this you will need to use a metal putty knife so that any peeling paint can be removed.
Allow the floor to dry after you clean it. Next check the floor for any cracks. In order to get a smooth floor, you will need to patch all the cracks. You can use an epoxy crack filler to do this. Ensure that the surface level is smooth and that you allow it to dry for at least four hours before putting on the primer.
Before you start applying the paint, you will need apply a primer to the floor. Ensure that you paint in the direction that is along the wood grain and that you smooth out the primer completely. Also ensure that you allow it to dry for two hours before applying the primer.
Now start applying the paint. You will first need to mix in the two components of the paint. Use the stir stick to mix it up completely. Once you are sure that the paint is mixed in completely, you can start the process of applying the paint.
Before painting the area of the flooring, it may be a good idea to first paint the perimeter of the garage. To ensure that you do not get paint on the walls or the door of the garage, it may be a good idea to use a duct tape to cover it up so that you can get paint till the edges. Once you have painted the sides, you can start painting the rest of the floor. Once you have painted the floor completely, ensure that you do not let anyone enter the garage till you have finished it completely.
Allow the first coat of paint to dry overnight or at least for 16 hours before applying the second coat. Also it may be a good idea to add a coating additive to the second coat which allows for non-skid flooring.
Allow the coat to dry for another sixteen hours and you can start parking your cars in the garage after a week. It may be a good idea to apply a coat of floor wax if you want a flooring that can be cleaned easily.

Learning to apply epoxy paint is extremely easy. If you have spilled paint on the walls you can use an epoxy thinner to remove the same. Painting the floor of your garage is an easy project that can be easily done over the weekend.

Interior Painting Ideas for Bedrooms

Interior Painting Ideas for Bedrooms

If you ask me my favorite place in this world, I would say my bedroom. This is one place where I can be simply me! I think this holds true for almost all of us. We relax in our bedrooms, watch TV, read, and talk to our family members. In other words, we carry on a lot of personal activities in this space of our house. That’s why, when it comes to painting the interiors of our bedrooms, we should go in for colors that reflect our personality. Of course, this does not mean that you end up painting the room bright red. Keeping the impact of colors on the room surroundings as well as on the mood of the inhabitants is equally important.

For all those who have taken on the task of painting a bedroom, a bit of knowledge of color psychology is a must. There are basically three kinds of colors, i.e., warm colors, cool colors, and neutral colors.

Warm Colors
Bright colors like yellow, red, and orange are considered warm colors. These colors are known to add energy and vibrancy to a room. They are believed to make the room look dark and small. That’s why, most experts will recommend you to avoid painting your bedroom with these colors.

Cool Colors
Green, blue, and all pastel shades like light pink and light purple fall in this category. Cool colors are believed to have a very soothing effect on the mind and body. If they are used for painting a bedroom, they can relax and calm the persons living in it.

Muted Colors
Neutral colors like gray, beige, skin color, and brown fall in this category. These colors are known to offer stability and comfort to the room surroundings. If painted on the bedroom walls, they can suppress the effect of bright colors used in the accessories or fabrics in the room.

Looking at the effect these colors have, cool colors are the most suited to paint bedrooms. Neutral colors are comforting, provided they are paired with some bright and interesting looking accessories and fabrics. Here are some colors and combinations that are in vogue.

Pink is often a preferred choice for painting a girl’s room, although, it looks equally good as a color for master bedroom walls too. As there are different shades of pink available in paints, a creative idea is to paint three walls in light pink color and the fourth one in a hot, bolder pink shade. This will make your room look interesting and come alive.

Yellow and White
Yellow is a warm color, which can make the surroundings excitable and energetic, instead of relaxing as they should be. Still, if balanced with white accessories and fabrics, as well as some white murals on the wall, it can make your bedroom look very cheerful.

Green and Blue
Both green and blue are very soothing colors. However, many people do not use them in combination, as they appear to be in contrast to one another. In reality, painting the bedroom in lighter shades like these can give it a unique feel. Keeping all the walls light green and painting the ceiling in sky blue with some white stars stenciled on it will lend a very natural feel to the room.

White and Red
If you are someone who wants a tinge of energy in the bedroom, painting the walls in white, and making designs on them in warm colors such as red is a good idea. Making circles of various sizes with red paint on the four corners, while keeping the room walls plain white, will even out the effect of warm color, and at the same time, the warm color will lend energy to the room. With this color combination, keep the room accessories red and white as well.

Sponge painting, faux painting, making hand prints on one of the walls, stripes, polka dots, geometric designs, murals, trees and leaves―you can do whatever you want on your bedroom walls, as long as it does not overwhelm the surroundings or makes the room appear cramped. One last tip―your bedroom is your personal sanctuary, so paint it with some creative designs and colors that are totally you.

Garage Floor Coating and Painting Tips

Garage Floor Coating and Painting Tips

The garage is the most neglected part of the house. It is because of this that it tend to gets smelly and dirty, and requires constant repairs. The floor space also needs to be constantly touched up with paint because it is utilized the maximum. This information is only to create awareness, and ultimately you will have to take the decision yourself depending on your preferences for the space.

Types of Coatings and Some Tips

Epoxy, polyurethane, acrylic sealer/stainer, and latex are the four kinds that are available in the market. Here is some information about them.

This is the most widely used as it forms a hard durable surface and a strong bond on the concrete. They are a much thicker coating than acrylic and are also believed to be very durable. Further, this covering tends to turn yellow and loses its gloss when it is exposed to sunlight for long periods of time. Remember to prepare the area, before applying the epoxy and ensure that it is completely free of dirt and dust. When that is done, wait for the right temperature and apply it. However, they are difficult to apply as they require thorough concrete preparation and the use of rollers. Moreover, they are time sensitive during the application. Epoxy dries to a touch in a few minutes, however, do wait for many days before you drive your car over it.

Acrylic Sealers
These can also give it a more attractive look by providing a somewhat wet and shiny appearance, or you can also opt for a matte finish that is less flashy. When applied, these dry to touch in a few hours. According to the weather conditions at the application time, they can be driven on the next day or earlier than that. It is better to opt for these with UV protection, as the exposed parts can turn yellow over a certain period of time.

Another alternative, polyurethane resists chemical spills much better than epoxy and does not even fade easily. Along with these features, it is a very durable one that dries to a high gloss. Unfortunately, it cannot be used on the floor directly. If you do plan to use polyurethane, you would need to first apply an epoxy primer on the floor and then the same.

Latex Paints
The cheapest of all, latex paints are antique looking stains that can create a unique and warm finish. This paint covers imperfections on the concrete and is permanent. The stain coating can be damaged because of exposure to the sun, it is thus advisable to apply a protective coating over it.

Some Painting Tips

When you begin it, ensure that the area in which you are working is well ventilated. Also, wear eye protection and protective gloves in order to protect your hands and eyes against the chemicals.

To begin using the epoxy paint, sweep and clean the area thoroughly.
To remove the stains use a 3 to 1 water to bleach mixture, or a driveway or commercially-prepared cleaner. Use a sprayer to spray the cleaner on to the stains and allow it to soak for a few minutes. Once the time is over, scrub the stain using a stiff-bristle brush.
Now, starting at the back of the garage, rinse the area well with clean water. Use a pressure washer for tough stains.
After that is done, wait for the floor to dry. Use concrete or mortar-repair compound for smaller cracks and concrete patches to repair the smaller cracks and big cracks respectively. When the compound is being applied, make sure that the cracks are clean and dry.
Next, etch the surface of the concrete. Basically, this is a process wherein the pores of the concrete surface are opened. You can check if the floor needs to be etched by sprinkling a small amount of water on the same. If the floor absorbs the water, then the concrete does not need etching.
If you have to etch it, then let it dry thoroughly. To help with the drying process, you can switch on the fan.
Now use a long-handled paint roller to apply a primer coat. Remember to let it dry for at least 8 hours before applying the topcoat.
Use nylon brushes. The roller covers that you use, should be lint-free and solvent and water resistant.
Do a touch-up on the required areas once a year.

Steps to Paint Vinyl Floors

Steps to Paint Vinyl Floors

Vinyl flooring is made from polyvinyl chloride, more commonly known as PVC. They are available either as tiles or in big sheets. In comparison with other flooring materials, vinyl flooring is more affordable. The cheaper option to changing the flooring is to just paint it. These are just a few steps that one should adhere to in order to avoid burning a hole in the pocket.

Vinyl flooring tiles have sheen over them. To remove this, buy a chemical wash from the paint dealer. There are two types of wash available, viz., trisodium phosphate or any ammonia-based solution. Use the chemical wash on the floor before painting it.
The floor should be dried completely, before starting off with the next step. Rub the floor using a sandpaper to remove all the shine.
There is a possibility that a de-glosser may be required, as the sandpaper might not be able to get rid of all the gloss from the corner areas. Before jumping to the next step, take a break for at least 15 minutes.
Just as in the case of painting walls, apply a coat of primer to the floor before painting it. Use any water-based primer, as PVC is a paint-resistant surface. The primer should be applied as a thick layer using a rolling brush, and make sure that all the edges and corners are also primed. Let it dry thoroughly for approximately 48 hours. The primer acts as an adhesive for the paint to stick to the vinyl flooring., so it is advisable to apply a second coat of it for increasing the longevity of the paint.
While you let the primer dry, why not undertake a survey and decide on the paint that you want to use. Normally, oil paint, garbage paint, or porch paint should be used. The porch paint will give the best results, as it is durable and would last at least a little more than other types of paint. It is suggested that a thick coat of paint should be applied, since the floor is utilized the maximum and there are chances of more wear and tear. Painting should be started at the farthest corner from the door. The paint should be applied using a roller brush, as it gives an even coating. Two to three coats of paint can be applied to the floor. Check if there are any imperfections. If you do come across an imperfection, just remove it. Let the paint dry thoroughly between each coat.
If you want to spruce up the look of the newly-made flooring, stencil patterns and designs available at craft stores can be added to it. To stick the pattern to the floor, you need a spray adhesive. Place the patterns the way you want them on the floor. Using the spray adhesive, stick them to the floor temporarily and apply the stencil paint. The spray adhesive will hold the stencil in place and will not let it move when the paint is applied. You can also create your own stencil designs and patterns. In case there are certain designs that you like, you can place them on the floor too. The procedure is the same as that for stencil designs and patterns. These ‘homemade’ designs will last due to the process that will be undertaken in the next step.
After the stencil work is done, the paint needs to be sealed. Since the floor is the most used part of the house, extra protection needs to be taken for the paint to last. The sealer will also give a clear finish to the floor. It is also necessary to choose a sealer compatible to the paint. Normally, polyurethane is suggested for the same. Use two to three coats of sealer to save time, energy, and money.

Let us rush and get the materials, and start right away. We will be able to create our unique floors and flaunt them as though they were designed by a well-known designer.